Retsch RS 200 User Manual download pdf (Page 8)

15.11.2006  Retsch GmbH 8 Doc. Nr. D 98.725.9998

Technical data

Machine type designation: RS200

Use according to the intended purpose

Retsch vibratory disc mills are used for rapid, loss-free, fine milling

of medium-hard, hard/brittle and hard/tough materials. Both dry

and wet milling operations can be carried out. Milling with solvents

is permitted. In this case, however, the supplementary notes in the

section „Wet milling with easily flammable materials“ must be

observed.

Soil samples, ores, coal, coke, corundum, metal oxides,

minerals, plant samples, slags, silicates, cement and many

other substances can be milled, easily, quickly and without loss.

These oscillating disc mills are used successfully in practically all

areas of industry and research, particularly where stringent

requirements are set on purity, quickness, fineness and

reproducibility.

They are not designed as production machines, but as laboratory

equipment, intended for 8-hour single shift operation.

Do not make any alterations to the machine and use only spare

parts and accessories approved by Retsch.

Otherwise the Declaration of Conformity with the European

directives declared by Retsch loses its validity. Furthermore this

will result in the loss of any kind of guarantee claims.

Milling cup – nominal volume

Special steel: 50 / 100 / 250 ml

Agate: 50 / 100 ml

Tungsten carbide: 50 / 100 ml

The filling quantity of the milling sets must be more than 1/3 of

the nominal volume.

The rings used could otherwise become damaged.

Maximum charged grain size

The maximum charged grain size depends on the milling cup

volume and the degree of hardness of the milling material.

Milling set 50 ml = max. grain size < 5mm

Milling set 100 ml = max. grain size <10mm

Milling set 250 ml = max. grain size <15mm

Driving power

1500 W

Motor speed

The speed is adjustable in the following range:

 700 - 1500 min

-1

For agate sets adjustment of a speed greater than 700 min

-1

is not

possible.

If no milling set is clamped in position the speed is also limited to

700 min

-1

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Comments to this Manuals

No comments

Retsch RS 200 User Manual Page 8

Comments to this Manuals

Related products and manuals for Equipment Retsch RS 200