Retsch RS 200 User Manual download pdf (Page 11)

15.11.2006  Retsch GmbH 11 Doc. Nr. D 98.725.9998

Temperature variations

If temperature variations are high (e.g. during air

transport) the RS200 must be protected against

condensed water. Otherwise the electronic components

can become damaged.

Intermediate storage

Ensure that the RS200 is also stored dry during

intermediate storage.

Erection

Erect the RS200 on a firm base. Further parameters are given

in the section „Technical data”.

Net weight of RS200: approx. 210 kg

The machine must be locked in position before starting up.

For this purpose press the locking lever F of the two front

rollers downwards.

Parameters for the place of installation

Ambient temperature: 5°C to 40°C

If the ambient temperature drops below or exceeds these

values the electrical and mechanical components can become

damaged and performance data are changed to an unknown

extent.

Atmospheric humidity

Maximum relative humidity = 80% at temperatures up to 31°C,

decreasing linearly down to 50% relative humidity at 40°C.

At higher atmospheric humidity the electrical and mechanical

components can become damaged, and performance data are

changed to an unknown extent.

Installation height: max. 2000 m above sea level

Transport safety device

The driving unit of the RS200 is locked for transport.

Before starting up for the first time the two cheese-head

screws Z fitted under the rubber cover G must be

removed (Fig. 3 Transport safety device).

To do this lift the rubber cover G upwards and unscrew

the cheese-head screws. Then pull out the cheese-head

screws side wards together with the sleeve P (Fig. 4

Removing the transport safety device).

Keep the cheese-head screws for further transport.

Fig. 3 Transport safety device

Abb.1 Betriebsarten

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

No comments

Retsch RS 200 User Manual Page 11