Retsch RS 200 User Manual download pdf (Page 27)

15.11.2006  Retsch GmbH 27 Doc. Nr. D 98.725.9998

Opening the cover

 Press the “open cover” button or

 disconnect the mains plug at the back of the machine

and use the emergency unlocking key

(see chapter on Emergency Unlocking)

 Remove only the lower cover caps.

 Unscrew the two cheese-head screws.

 Take off the lower cover.

The three rubber springs must be greased every 250h operating

hours at the top and bottom ends of the guide bolts. Use the

“Staburags NBU 4MF” heavy-duty lubricant type from Klüber or

another heavy-duty lubricant of the same quality.

 To grease, remove the rubber springs and put a

sufficient quantity of grease into the two holes.

Wearing parts

The 3 rubber springs should be replaced after approx. 500

operating hours. Order no. 03.228.0003

The rubber plate should be replaced after approx. 300 operating

hours. Order no. 03.243.0045

rubber plate

These operating instructions do not include any repair

instructions. In the interests of your own safety, repairs should

only be performed by Retsch GmbH or authorised agent or

service technicians.

Distribution or duplication of this documentation, using or passing

on the contents, is allowed only with the express permission of

Retsch GmbH.

Persons violating are liable to pay damages.

Alterations

Subject to technical alterations without notice.

Cover caps

Cheese-head screws

Abb.16 Bedienfeld

ZKS

Abb.16 Bedienfeld

Lowe

cover

Rubber springs

Abb.16 Bedienfeld

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

No comments

Retsch RS 200 User Manual Page 27