Retsch RS 200 User Manual download pdf (Page 26)

15.11.2006  Retsch GmbH 26 Doc. Nr. D 98.725.9998

General

Cleaning

Do not clean the RS200 with running water.

Danger to life through current surge.

Use only a cloth moistened with water. Solvents are not

permitted.

Maintenance

To ensure that your RS200 will function reliably, the following

maintenance work should be done from time to time, but at the

latest every month :

 Check that roller 1 in the locking bolt moves easily. If it

doesn’t, oil it, e.g. with sewing machine oil.

(Fig. 17 Locking bolt)

 Clean magnets 2 in the locking bolt.

 To ensure that the grinding jar can be clamped and

released safely, it is essential that the clamping

mechanism can move easily. It must be checked and

cleaned every day and lubricated when necessary.

(Fig. 17.1 Locking bolt)

To ensure that the housing cover on the RS 200 can close

reliably, it is essential that roller 1 in the locking bolt can move

easily.

Maintenance of the rubber springs

Caution! Due to capacitor discharging at the frequency converter

the device conducts voltage for up to 3 minutes after the mains

plug has been disconnected.

Fig. 17 Locking bolt

Fig. 17.1 Clamping mechanism

Clamping

mechanism

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

No comments

Retsch RS 200 User Manual Page 26