Retsch RS 200 User Manual download pdf (Page 15)

15.11.2006  Retsch GmbH 15 Doc. Nr. D 98.725.9998

Emergency unlocking

A key for the machine is included in the delivery, with which

the RS200 can be manually opened if there is a power failure.

(Fig. 9 Emergency unlocking)

 (I) Insert the (S) key into the (O) opening on the

right-hand side.

 (II) To unlock the gear, the key must be pushed in

further with some degree of force. While pushing the

key in, turn it in a clockwise direction as far as it will

go.

The cover can now be opened.

The emergency unlocking device must never be operated

when the machine is running – only when the machine is at a

standstill and is disconnected from the mains supply.

Danger of injury through unbraked, after-running of the

drive.

Insertion and clamping of the milling set of the

RS200

Wolframcarbid Tungsten carbide (WC) grinding sets

(01.462.0177 • 01.462.0265 • 01.462.0264)

NOTE: RS 200: Operate WC grinding sets only at speeds

≤1200 min-1.

RS 100 max. speed ok.

Do not use the grinding jar if it has 4 identical 13-mm-

diameter boreholes on the bottom.

These grinding jars may only be used in RS200 devices that

do not have a change index after the serial number. This

means that if a change index (e.g. xxxxxxxxx-F) is specified

behind your device’s serial number, you may not use the

older grinding jar described in the above.

Older grinding jars with 4 identical boreholes on the bottom

(13mm) can be reworked free of charge.

Fig. 9 Emergency unlocking

Abb.7 Bedienfeld

RS 200 Max. Speed

≤ 1200 min

-1

RS 100 Max. Speed

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

No comments

Retsch RS 200 User Manual Page 15