Retsch BB 200 User Manual download pdf (Page 8)

04/05/2012 Retsch GmbH 8

Shipping and installation

Packing

The type of packaging used has been selected in accordance with

the shipping mode. It complies with generally accepted

packaging guidelines.

Please retain the packaging for the duration of the

guarantee since, in case of a claim, returning in unsuitable

packaging can jeopardize your guarantee entitlements.

Shipping

The BB 200 shall not be subjected to impact or vibration

during transportation; it shall not be thrown. The

electronic and mechanical components could otherwise be

damaged.

Abb.1

In order to be able to transport the BB 200 with a crane

(capable of lifting at least 500 kg), it should be fixed with

ties as in figure 1.

Intermediate storage

Please pay attention to the fact that the BB 200 must also

be kept dry when in intermediate storage.

Temperature fluctuations

In case of wide temperature fluctuations (during shipment

by air, for instance) the BB 200 will have to be protected

against condensation; the electronic components could

otherwise be damaged.

Intermediate storage

Also ensure that the BB 200 is stored in a dry place.

Requirements for the installation site

Ambient temperature:

5°C to 40°C

When the ambient temperature exceeds or falls below that

specified, the electronic and mechanical components may be

damaged, and performance data changed to an unknown

extent.

Humidity:

Maximum relative humidity 80% at temperatures up to 31°C;

linear decline down to 50% relative humidity at 40°C.

At higher humidity, the electronic and mechanical

components may be damaged, and performance data

changed to an unknown extent.

Installation site – altitude

max. 2000 m above mean sea level

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Comments to this Manuals

No comments

Retsch BB 200 User Manual Page 8

Comments to this Manuals

Related products and manuals for Equipment Retsch BB 200