Retsch GmbH, Retsch-Allee 1-5, 42781 Haan, Germany 5/4/2012 0004 O p e r a t i n g I n s t r u c t i o n s B B 2 0 0 J a w
04/05/2012 Retsch GmbH 10 Operation Target group: Operators Control elements and their use Schematic view of the operating controls , part
04/05/2012 Retsch GmbH 11 Control elements and their use Schematic view of the operating controls, part 2: Front view
04/05/2012 Retsch GmbH 12 The operating controls and their functions Summary table Element Description Function A ON/OFF switch and motor
04/05/2012 Retsch GmbH 13 Starting the BB 200 The BB 200 may be started only in the idling mode, i.e. without product in the h
04/05/2012 Retsch GmbH 14 Adjust the gap width Fig. 4 * Start the BB 200 (idling, without product). * Loosen the lock nut N (turn to t
04/05/2012 Retsch GmbH 15 Working instructions Target group: Laboratory technicians General The BB 200 is a rugged, floor-mounted u
04/05/2012 Retsch GmbH 16 General Cleaning An industrial vacuum cleaner and a stable, long-handled brush are best suited for cleani
04/05/2012 Retsch GmbH 17 Maintenance CE Fig. 8 The BB 200 is to be lubricated from time to time. Fig. 8 Kindly refer to the table below f
04/05/2012 Retsch GmbH 18 Replacing the breaker jaws Fig. 10 The stationary breaker arm S can be removed to provide sufficient s
04/05/2012 Retsch GmbH 19 Safety instructions (table) for the BB 200 taken from the chapters Procedure Action Dangers Safety Not paying
04/05/2012 Retsch GmbH 2 Information on these operating instructions The present operating instructions for the Model BB 200 jaw
Authorized person for the compilation of technical documents: J. Bunke (technical documentation) The following records are held by Retsch GmbH
Copyright ® Copyright by Retsch GmbH Haan, Retsch-Allee 1-5 D-42781 Haan Federal Republic of Germany
04/05/2012 Retsch GmbH 3 Information on these operating instructions ... 2 Safety ...
04/05/2012 Retsch GmbH 4 Safety Target group: Anyone who deals with the machine in any capacity whatsoever. The BB 200 is a modern,
04/05/2012 Retsch GmbH 5 Warnings The following symbols are used to identify specific hazard po-tentials: ! Personal injury Property da
04/05/2012 Retsch GmbH 6 Technical specifications Machine designation: BB 200 Utilization in accordance with the intended purpose The BB 2
04/05/2012 Retsch GmbH 7 Noise emissions Noise measurements according to DIN 45635-31-01-KL3 Characteristic noise values are dependent on
04/05/2012 Retsch GmbH 8 Shipping and installation Packing The type of packaging used has been selected in accordance with the shipping
04/05/2012 Retsch GmbH 9 Fig. 1 Installation Set up the BB 200 only a flat and solid surface. Anchoring is not absolutely
Comments to this Manuals