Retsch ZM 200 User Manual download pdf (Page 26)

08.02.2012 Retsch GmbH 26 0003

Adjusting the lock if the cassette

cover leaks

1 2 3 4 5

The lock in the housing cover can be subsequently adjusted to rectify leaks in the cassette cover.

Apply open-jaw spanner 1 size 30, not contained in the scope of supply

Undo lock nut 2 by turning it to the left

Turn counter nut 3 by hand in ¼ turns so that the distance between lock roller 4 and lock nut 2

becomes smaller

Repeat the steps above until the cassette cover is sealed again

CAUTION !

Once the adjustment work has been completed, retighten lock nut 2, lock roller 4 should then

be parallel to the edge of housing cover 5

Reproducing or distributing this documentation, or utilizing and

distributing the contents is not permitted unless Retsch GmbH

has given express permission to do so.

Violations against this are subject to claims for damages.

Changes

Technical changes are reserved.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

No comments

Retsch ZM 200 User Manual Page 26