Retsch RM 200 User Manual download pdf (Page 9)

11/6/2012 9  Retsch GmbH 0002

Technical data

Target group: Operating authority, operators

Machine type designation: RM200

Use according to the intended purpose

This machine is not designed as a production machine but as

laboratory equipment, intended for an 8 hours single shift

operation with 30% operating time.

The RM200 is suitable for dry and wet milling of soft, medium

hard, hard, pasty and brittle materials, up to a hardness of 9

on the Mohs’ scale.

Furthermore quantities of approx. 10 to 190 ml and a max.

charging grain size of 8 mm can be ground and homogenised

with the RM200, without manual use of force.

A final fineness of down to 0.01 mm (10 µm), and in individual

cases even below this value, can be achieved with the RM200.

Do not make any alterations to the machine and use only

spare parts and accessories approved by Retsch.

Otherwise the Declaration of Conformity with the

European Directives by Retsch loses its validity.

Furthermore this will result in the loss of any kind

of guarantee claim.

Emissions

Noise characteristic values :

Noise measurement according to DIN 45635-031-01-KL3

Intensity of sound L

= 85 dB(A)

Emission value related to workplace L

pAeq

= 72 dB(A)

Operating conditions:

Material to be milled = quartz sand, grain size < 1 mm

Protective system: IP53

Rated power: 230 Watt

Machine dimensions

Height: 480 mm up to approx. 550 mm with lid opened

Width: 400 mm

Depth : 370 mm up to approx. 510 mm with lid opened

Weight: approx. 24 kg without mortar and pestle

Required floor space

400 mm x 400 mm plus space at the rear for the opened

lid. No safety distance required.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

No comments

Retsch RM 200 User Manual Page 9